A694 A105 Carbon Steel Flanges
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||10 Piece/Pieces|
|Delivery Time:||20 Days|
|Packaging:||Wooden Cases or as per buyer's requirements|
|Place of Origin:||Cangzhou,China|
|Port:||Zhengzhou Train Station,Tianjin New Port,Beijing Air Port|
Model No.: Carbon Steel Flanges
Carbon Steel Flanges
Carbon steel flange, that is, the main material is carbon steel flange or end flange connectors. It contains carbon steel flange, known as carbon steel flange.
Carbon Steel Flanges are designed with care using current techniques under the visionary guidance of accomplished professionals at manufacturing unit. Offered range is stringently tested on various parameters of quality for ensuring flawlessness and defect free. These products are widely used in various industries and widely appreciated by clients for owning unmatchable characteristics. Offered range supplied in quality assured packaging material.
The standards of A694 are more rigorous than the more common SA105N and SA350LF2 grades, providing more robust specifications for high-pressure fluid transmission in oil and gas piping systems. The increased demands on the physical properties of the steel create a stronger metal throughout the pressure range, from low to high temperature services.
Each grade in the A694 specification is assigned a number correlating to the minimum yield strength (in ksi units) required for that grade; GradeF52 for example requires a minimum Yield Strength of 52 ksi.
This is a mild Carbon Steel that is not only one of the most common of the Carbon steels, but also one of the most common steels in the world. It is hard, not brittle or ductile, and has a low price point. SA105N is very common throughout many industries, and is even used with stainless Steel piping systems with the aid oflap joint End Rings
We stock large diameter Fitting(18" – 42") SLIP-ON, Lap Joint, Weld Neck, and Blind Flange in SA105N, in class 150 and 300, and can also source a variety of sizes and classes for longer lead times, from 12" to 60".
This is a grade of Carbon Steel intended primarily for low-temperature service and requires notch toughness testing. Very similar to SA105N, this material is used in more industrial applications such as the oil and gas industries.
|Tensile Strength, ksi [MPa]||70-95 [485-655]|
|Yield Strength, Min., ksi [MPa]||36 |
|Elongation - 2 in. [50mm] / 4D, Min., %||30 / 22|
|Reduction of Area, Min., %||40.00|
|Brinell Hardness, max||187|
We can supply large diameter Flanges of all types in SA350LF2, from 18" to 60", in a wide variety of pressure classes.
The A350 LF2 Line is often referred to as Carbon Steel Low Temp Fittings or Flanges
We carry a large inventory of Carbon Steel Flanges in many types and sizes.
Grades of Carbon steel flanges:We shall be pleased to develop Non-Standard
- ASTM A105, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2
- ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70
Carbon Steel Forged Flanges
A flange is defined as a plate type device, normally round, that is attached to the end of a pipe, fitting, valve or other object to facilitate the assembly and disassembly of a piping system.
Flanges are manufactured in all the different materials to match the material of the pipe and fittings to which they are being attached. While some flanges are made of Cast Iron, the vast majority of flanges are forged carbon steel.
Forged steel flanges are made in seven primary ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500 & Class 2500-
Chemical Composition of ASTM A694
ASTM A694 Standard covers carbon and alloy steel forgings for pipe flanges, fittings, valves, and parts for high-pressure transmission service.
|ASTM A694 F42||0.26-0.265||1.60-1.64||0.025-0.030||0.025-0.030||0.15-0.35|
|ASTM A694 F52||0.26-0.265||1.60-1.64||0.025-0.030||0.025-0.030||0.15-0.35|
|ASTM A694 F60||0.26-0.265||1.60-1.64||0.025-0.030||0.025-0.030||0.15-0.35|
|ASTM A694 F65||0.26-0.265||1.60-1.64||0.025-0.030||0.025-0.030||0.15-0.35|
Combining values from the two systems may result in nonconformance with the standard.
|Grade||Yield Strength (0.2 % Offset), min, ksi [MPa]|| Tensile Strength |
min, ksi [MPa]
|Elongation in 2 in. or 50 mm, min %|
|F42||42 ||60 ||20|
|F46||46 ||60 ||20|
|F48||48 ||62 ||20|
|F50||50 ||64 ||20|
|F52||52 ||66 ||20|
|F56||56 ||68 ||20|
|F60||60 ||75 ||20|
|F65||65 ||77 ||20|
|F70||70 ||82 ||18|
Carbon Steel Flanges are corrosion resistant and have a wide variety of uses. We carry variety of threaded flanges, weld neck flanges and slip on flanges and of course we can can custom build Carbon Steel Flanges to your specifications.
TYPES OF FLANGES
Types of flanges
The most used flange types in Petro and chemical industry are:
Weld Neck Flange
Slip On Flange
Socket Welding Flanges
Lap Joint Flange
Threaded Pipe Flange
Blind Flanges, Figure-8 Blanks
Types of Special flanges
Except the most used standard flanges, there are still a number of special flanges such as:
Spectacle Blind Flange
Weldoflange / Nipoflange
Custom Carbon Steel Flanges
Carbon Steel Flanges are corrosion resistant and have a wide variety of uses. We carry a variety of threaded flanges, weld neck flanges and slip- on flanges and, of course, we can can custom build steel flanges to your specifications.
Carbon Steel Flanges Finished
Natural, Nickel Plated, Electro Polished Plated or any coating as per customer specification.
Any kind of special Die casting sand gravity die lost wax shell moulding castings and cast parts casting produced to user specifications. We can be more competitive than Chinese castings and cast parts made in China Taiwan Asia Korea as traditional Indian expertise in Brass castings and Brass casting is superior and Indian Carbon Steel foundry / foundries are more competitive than other S.S. Carbon Steel
Shijiazhuang Bang dong Pipeline Technology Co,Ltd.
Shijiazhuang Bangdong pipe Technology Co., Ltd is located in Shijiazhuang , the capital city of Hebei , with superior geographical position and convenient transportation.It is a real professional manufacture and exporter of pipe fittings ASME ANSI B16.9, AND JIS.
The company produces and exports pipes and pipe fittings, including ELBOW/TEE/REDUCER/CAPS/FLANGE and other pipeline products . With technological production team and excellent sales staff , we keep improving efficiency regularly and ensure a better customer service experience. Our company values product quality and set up a complete quality control system and comprehensive detection means.
We insist "customer focus, honest in business, faithful in services, trusty in advertisement", Try to make the market leading products and to be reliable manufacturers by customers. Pay great attention to every detail, accurate to each number, refinement to every joint. "Give me a chance, bring you a surprise!" Sincerely welcome all customers to discuss cooperation.
- Company Name: Shijiazhuang Bang dong Pipeline Technology Co,Ltd.
- Representative: Mr.Liu
- Product/Service: Seamless Steel Pipes , Butt Weld Pipe Fittings , Forged Pipe Fittings , Steel Flanges , Pipe Elbow & Tee & Reducer , Fittings & Flanges
- Capital (Million US $): 100
- Year Established: 2015
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 6
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: no
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: Yanta Road,Yanshan County,Cangzhou City,HeBei Province,China
- Contact Person: Ms. luffy
- Tel: 86-0311-83886517
Premium Related Products